Bücher der Reihe Advanced Structured Materials

The development of nanomaterials opens the possibility for new materials with outstanding properties compared to classical engineering materials. Nanocomposite materials are formed by mixing two or more dissimilar materials at the nanoscale in order to control and develop new and improved structures and properties.

This book describes most recent advances and limitations concerning design of adhesive joints under humid conditions and discusses future trends.

It shows models for all important classes of composite materials and introduces into the latest advances. In three parts, the book covers Composite Materials (Part A), Porous and Cellular Materials (Part B) and the appearance of a conjoint solid phase and fluid aggregate (Part C).

Well known experts present their research in materials for drug delivery, dental implants and filling materials, biocompatible membranes, bioactive surface coatings and bio-compatible and eco-sustainable building materials.

This book, "Heat and Mass Transfer in Porous Media", presents a set of new developments in the field of basic and applied research work on the physical and chemical aspects of heat and mass transfer phenomena in a porous medium domain, as well as related material properties and their measurements.

This volume highlights the latest developments and trends in advanced materials and their properties, the modeling and simulation of non-classical materials and structures, and new technologies for joining materials.

This collection provides researchers and scientists with advanced analyses and materials design techniques in Biomaterials and presents mechanical studies of biological structures. In 16 contributions well known experts present their research on Stress and Strain Analysis, Material Properties, Fluid and Gas mechanics and they show related problems.

This is the second volume of a two-volume work which summarizes in an edited format and in a fairly comprehensive manner many of the recent technical research accomplishments in the area of Elastomers.

Increasing concern with fuel consumption leads to widespread interest in lightweight structures for transportation vehicles.

Due to their advantages in strength, weight and cost, adhesively bonded joints are used increasingly in aerospace and automotive applications. This book addresses the various joint types and bonding techniques, emphasizing applied results with practical cases.

Common engineering materials reach in many demanding applications such as automotive or aerospace their limits and new developments are required to ful ll increasing demands on performance and characteristics.

The book summarizes in a comprehensive manner many of the recent technical research accomplishments in the area of natural polymers. it covers all topics related to natural biomaterials such as natural rubber, cellulose, chitin, starch, hemicellulose, lignin, alginates, soy protein, casein and their bionanocomposites and applications.

The development of nanomaterials opens the possibility for new materials with outstanding properties compared to classical engineering materials. Nanocomposite materials are formed by mixing two or more dissimilar materials at the nanoscale in order to control and develop new and improved structures and properties.

Deploying state-of-the-art modeling techniques, this volume explores the full spectrum of topics related to transport in porous media, from single and multi phase flows in differing structures to experimental validation and specific technological applications.

It summarize the importance of elastomers and their multiphase systems in human life and industry, and covers all the topics related to recent advances in elastomers, their blends, IPNs, composites and nanocomposites.This first volume focuses on advances on the blends and interpenetrating networks (IPNs) of elastomers.

Accordingly, the same mathematical apparatus allows us to study not only mathematical structures such as quadratic forms, but also mechanics problems such as multibody rigid mechanics, continuum mechanics, vibrations, elastic and dynamic stability, and dynamic systems.

This book shows an update in the field of micro/nano fabrications techniques of two and three dimensional structures as well as ultimate three dimensional characterization methods from the atom range to the micro scale.

This book presents recent material science-based and mechanical analysis-based advances in joining processes. friction stir welding, joining by plastic deformation, laser welding, clinch joining, and adhesive bonding, as well as hybrid joints.

This book discusses recent findings and advanced theories presented at two workshops at TU Berlin in 2017 and 2018. It underlines several advantages of generalized continuum models compared to the classical Cauchy continuum, which although widely used in engineering practice, has a number of limitations, such as:¿ The structural size is very small.¿ The microstructure is complex.¿ The effects are localized.As such, the development of generalized continuum models is helpful and results in a better description of the behavior of structures or materials. At the same time, there are more and more experimental studies supporting the new models because the number of material parameters is higher.

This special anniversary book celebrates the success of this Springer book series highlighting materials modeling as the key to developing new engineering products and applications.

This book provides a new direction in electronics researchwith the invention of a new material tuPOY, which changes our perception ofdeveloping electronics.

This book discusses the expertise, skills, and techniques needed for the development of new materials and technologies. For example, modern joining technologies can be used to fabricate new compound or composite materials, even those formed from dissimilar component materials.

This book discusses the expertise, skills, and techniques needed for the development of new materials and technologies. For example, modern joining technologies can be used to fabricate new compound or composite materials, even those formed from dissimilar component materials.

This book contains the selected and peer-reviewed manuscripts that were presented in the Conferences on Multidisciplinary Engineering and Technology (COMET 2019), held at the University Kuala Lumpur Malaysian Spanish Institute (UniKL MSI), Kedah, Malaysia from September 18 to 19, 2019.

He is also well known outside Georgia for his individual approach to shell theory research and as an organizer of meetings, conferences and schools in the field. The collection of papers presented includes articles by scientists from various countries discussing the state of the art and new trends in the theory of shells, plates, and beams.

The present book focuses on recent advances methods and applications in photovoltaic (PV) systems.

This book presents selected papers presented at the 8th International Conference "Design, Modeling and Experiments of Advanced Structures and Systems" (DeMEASS VIII, held in Moscow, Russia in May 2017) and reflects the modern state of sciences in this field. The contributions contain topics like Piezoelectric, Ferroelectric, Ferroelastic and Magnetostrictive Materials, Shape Memory Alloys and Active Polymers, Functionally Graded Materials, Multi-Functional Smart Materials and Structures, Coupled Multi-Field Problems, Design and Modeling of Sensors and Actuators, Adaptive Structures.

This book presents a theoretical approach that allows the analysis of structures with magnetorheological and electrorheological layers, and shows, with the help of examples, how the mechanical behaviour of thin-walled laminated structures can be influenced.It consists of six chapters:Chapter 1 presents a brief overview of derivation approaches for theories of thin-walled structures, modelling of composites and modelling of laminated and sandwich structures.Chapter 2 describes the equivalent single layer model for thin laminated cylindrical shells, including the special cases of plates and beams. In addition to the classical mechanical properties, it also considers the electrorheological and magnetorheological properties.Chapter 3 presents the elastic buckling of laminated beams, plates, and cylindrical shells, discussing various problems, such as the influence of the boundary conditions, external loading and magnetic fields. It also suggests different approximations for asymptotic methods.Chapter 4 focuses on the free vibrations of elastic laminated beams, plates and cylindrical shells, investigating the influence of the boundary conditions and other factors.Chapter 5 presents the latest results concerning vibration of laminated structures composed of smart materials and discusses in detail the influence of electric and magnetic fields on smart structures. These results provide insights into the optimal design of these structures.Lastly, Chapter 6 features a short appendix presenting asymptotic estimates and series.

* Software ecosystems for hAM design, pre-processing, process planning, emulating and multi-axis processing; * 3D path generators for hAM based on a multi-objective optimisation algorithm that matches the recent curved adaptive slicing method with a new transversal scheme;